I've added new pictures for the kitchen table I've been building under other projects. 09/12/02

The plans for the current camera are complete!  If you noticed that I missed anything or you have any questions send me a email.  02/02/02

I've got everything done except for the Brass and Finish work on my current camera project.  That section won't take too long though. 01/15/02

I'm finally getting around to doing more work on the site.  Most of my current camera project is updated.  12/30/01  Happy New Year!

I've added the Power Point file with the plans to date to the web site (Camera 2 section).  As I finish up the plans I'll update the file and the site.  10/31/01

I finally have some pictures up of the finished Walnut and Maple camera.  Go to current camera project and each section will have pictures of the finished product.  10/20/01

OK, I got an email from a visitor to the site that asked when I was going to finish a few sections of the site.  Well, I finally got a chance to start working on the camera again and it is almost finished so I'll be finishing up the plans in short order.  I've just taken a whole roll of film of the camera so as soon as those are developed I'll get 'em up on the site as well.  Thanks for your patience.  Babies eat up a lot of time!  10/10/01

I've done a lot of stuff the the plans on my current camera project.  I've added some construction pictures to each of the sections and did some work to the plans for the standards, adding both complex and simple standards.  I hope you find what I've added helpful. 4/21/01

I've added a section on the construction of a bag bellows.  Time's been a bit tight since the birth of my new daughter on 2/23 so I haven't had time to add a lot to the site.  Sorry, I'll get more stuff up as soon as I can. 4/14/01

There are some additions to the spring back and ground glass frame section for my second camera and I've added a couple of pictures I've taken with the first camera I built. 3/16/01

I've added pictures and a little info on the first 4X5 camera I built.  I've also added some info to the ground glass creation page and made a couple of changes to the bellows page.  2/10/01

Plans are now up for the spring back on my second camera.  1/29/01

I've added the plans for the front and rear frames for my second camera. 1/24/01

I added all of the Fuji Films to the technical data page and added information on how to make a ground glass focusing screen.  1/23/01

Added some links and started putting some blueprints of the standards up on my second camera.  12/28/00 

Just added my bellow construction techniques today (under Camera Creation) and the first picture I took on my 4X5.  12/25/00

I've got quite a bit of technical data on 4X5 film loaded so at least that section has some good info.  12/25/00